1827.33$
Qté disponible :


Livraison

La majorité des produits en stock peuvent être livrés en 48 heures. Certaines exceptions s'appliquent. Nous vous recommandons de communiquer avec un représentant pour valider le prix et la disponibilité de cet article car il peut y avoir un délai pour la mise à jour des prix et de l'inventaire.

Garantie

Inso s’engage à remplacer par le même produit, tout logiciel, accessoire ou fourniture dans les 30 jours suivants l’achat. Notez que certains produits nécessitent un traitement direct entre le manufacturier et le consommateur.


Intel Ethernet Network Adapter E810-CQDA2T


Description


Intel Ethernet Network Adapter E810-CQDA2T - Adaptateur réseau - PCIe 3.0 x16 / PCIe 4.0 x16 - QSFP28 x 2



Manufacturier: Intel
Item Inso: 6113854
Sku: E810CQDA2TGG1


Increasing growth in 5G RAN and edge deployments is driving demand for high-precision timing synchronization across the network. Meet these challenging requirements head-on with a standards-based PCIe adapter that provides greater flexibility at a lower price point than single-purpose timing appliances. Most 5G RAN deployments use 1588 PTP, SyncE, or both to ensure required timing synchronization. Both of these synchronization methods are supported by the E810-CQDA2T, while additional hardware enhancements ensure reliability and accuracy, and provide greater flexibility and simplicity for timing synchronization deployments. Support for synchronization. Synchronous Ethernet (SyncE) delivers frequency synchronization over Ethernet between SyncE-enabled devices. Extends traditional telecom timing architecture to commercial-off-the-shelf (COTS) Ethernet solutions. IEEE 1588 PTP enables synchronization of systems on a network through the transfer of timing data (including frequency, phase, and time of day) with hardware timestamping in PTP packets. Onboard high-precision oscillator maintains high accuracy during holdover (when the synchronization source is not available), providing up to four hours with less than +/- 1.5 microsecond of phase error. Hardware features for deployment flexibility. Subminiature version B (SMB) coaxial connector allows connection to an external active GNSS antenna. Dual external SubMiniature version A (SMA) coaxial connectors allow connection to external 1PPS timing sources, such as GNSS signaling, devices and to timing recipients, enabling the network adapter to act as a grandmaster and as a timing source for other equipment. The output capability provides a way to audit the phase accuracy of each node. U.FL connectors, embedded coaxial connectors, allow 1PPS signal connectivity between the adapter and motherboard or another adapter. Dedicated send-and-receive U.FL ports are embedded on the adapter. Each port can be programmed to act as many different physical network adapters, with a maximum throughput of 100Gbps.


Ce texte étant fourni par le manufacturier, nous n'avons aucun contrôle sur la langue de celui-ci.

Description du produitIntel Ethernet Network Adapter E810-CQDA2T - adaptateur réseau - PCIe 3.0 x16 / PCIe 4.0 x16 - QSFP28 x 2
Type de périphériqueAdaptateur réseau
FormatCarte enfichable
Type d'interface (bus)PCI Express 3.0 x16 / PCI Express 4.0 x16
Révision des spécifications PCIPCIe 3.0, PCIe 4.0
PortsQSFP28 x 2
Dimensions (LxPxH)167 mm x 111 mm
Protocole de liaison de données10GbE, 100GbE, 25GbE, 50GbE
Protocole réseau / transportTCP/IP, UDP/IP, iSCSI, iWARP, NFS
Normes de conformitéIEEE 802.1p
Garantie du fabricantGarantie limitée à vie

Éléments contenus dans la boite :

Intel Ethernet Network Adapter E810-CQDA2T
Support pleine hauteur, bras demi-hauteur

 

Ouvrir une session

Vous n'avez pas de compte ?

Rien de plus simple.

Cliquez sur le bouton ci-dessous pour en créer un en quelques instants seulement.